Power Tools

Power Tools

Whether you are a Tradesman that requires new tools, or you are looking to tackle a DIY job at home, our impressive range of Power Tools will provide a helping hand in completing any task.

Mick George stock big name brands like Black & Decker, DeWalt and Makita that offer everything you need; from power drills and angle grinders to sanders and saws - browse our range of power tools that will help you get the job done. 

Do you already have the Power Tools at your disposal? Not to worry – Mick George have the answer to your accessory needs! From batteries & cordless chargers to drills bits, no practical effort will go unfinished.

We know that you’re only as good as your tools, that’s why we offer finance on power tools over £280, to ensure an affordable, cost-efficient way to obtaining the industry’s best equipment.

For all the Tradesman out there, don’t miss our great deals for trade store account customers. Sign up for a trade account today to receive exclusive offers and account deals. 

Can’t find what you’re looking for? Browse our great range of hand tools.

Set Descending Direction
per page
  1. HM1812 AVT Electric Breaker 1700 Watt 110 Volt
    HM1812 AVT Electric Breaker 1700 Watt 110 Volt

    The Makita HM1812 AVT Electric Breaker is a 30kg class electric breaker that features best-in-class power. These robust machines are equipped with vibration absorbing housing, providing a practical combination of high power and low vibration. The counterweight mechanism reduces vibration when chipping.

    A soft no load function automatically reduces the motor speed during idling to suppress the vibration of the machine body. LED's indicate when to replace carbon brush. The name plate and serial label have been positioned to prevent scratches and damage. The breaker can be attached to a dust extractor.

    Compatible with Hammer Trolley (NOT supplied).

    £1,213.02
  2.  HM1317CB 28.6mm Hex AVT Demolition Hammer 1510 Watt 110 Volt
    HM1317CB 28.6mm Hex AVT Demolition Hammer 1510 Watt 110 Volt

    The Makita HM1317CB Demolition Hammer offers high durablity and excellent demolition performance. Suppression of motor speed during no-load reduces vibration of the tool body. It also has a handy LED lamp that indicates when to replace the carbon brush.

    The unique Makita AVT Anti Vibration Technology design employing the pneumatic pressure created in the drills hammer piston chamber to move a counter balance in the opposite direction to reduce the impact vibrations at the steel point. This dramatically reduces vibration.

    Supplied with: 1 x Bull Point, 1 x Side Handle and 1 x Carrying Case.

    £1,182.66
  3. HM1317C 30mm Hex AVT Demolition Hammer 1510 Watt 110 Volt
    HM1317C 30mm Hex AVT Demolition Hammer 1510 Watt 110 Volt

    The Makita HM1317C Demolition Hammer offers high durablity and excellent demolition performance. Suppression of motor speed during no-load reduces vibration of the tool body. The unique Makita AVT Anti Vibration Technology design employing the pneumatic pressure created in the drills hammer piston chamber to move a counter balance in the opposite direction to reduce the impact vibrations at the steel point. This dramatically reduces vibration.

    Supplied with: 1 x Bull Point, 1 x Side Handle and 1 x Carrying Case.

    £1,152.30
  4.  HM1304B 29mm Hex 1.1/8in A/F Demolition Hammer 1500 Watt 110 Volt
    HM1304B 29mm Hex 1.1/8in A/F Demolition Hammer 1500 Watt 110 Volt

    The Makita HM1304B 29mm Hex 1.1/8in A/F Demolition Hammer produces an extremely low noise and vibration with outstanding power. The lock-on button allows for continuous operation and it fitted with an ergonomic soft rubber grip. The tool is double insulated for added safety.

    It is supplied with a bull point and a carry case.

    £1,102.62
  5. HR5212C Rotary Demolition Hammer 1510 Watt 240 Volt
    HR5212C Rotary Demolition Hammer 1510 Watt 240 Volt

    The Makita HR5212C Rotary Demolition Hammer has developed to provide higher operating efficiency and more comfort with unrivalled low levels of vibration. It has two modes of operation, Rotary Hammer and Hammer Only. It has a Soft No Load function that automatically reduces the motor speed during idling to suppress the vibration of the machine body.

    The HR5212C is fitted with AVT (Anti-Vibration Technology, vibration absorbing housing. The speed of drilling is easily controlled via the variable speed control dial and it offers constant speed control, even in difficult applications. The soft start and torque limiter prevent damage to the machine and the ergonomic soft grip provides comfort even in prolonged periods of use.

    It is fitted with a SDS Max, one touch sliding chuck for easy bit installation and removal and has a lock on mechanism for chiselling mode. The LED service and power warning lights, prevent unnecessary damage and tell you when parts need replacing. The machine is also compatible with a dust extractor attachment, not supplied.

    £902.52
  6. LF1000 Flip Over Saw 1650 Watt 110 Volt
    LF1000 Flip Over Saw 1650 Watt 110 Volt

    The Makita LF1000 Flip Over Saw is fitted with a lightweight and powerful motor that makes the conversion from mitre to table saw quick and easy whilst being able to cut tricky material and hard wood. The saw has a Soft-Start feature and maintains constant speed under load. For added safety is has a on-off switch with anti restart feature.

    It has a machined aluminium table for strength and accuracy, whilst the aluminium cast base gives superb rigidity. The fold away legs allow for easy transport in car or van. It is excellent for all aspects of site work, including 1st and 2nd fix.

    It is supplied with a TCT blade, rip fence, bevel guide, push stick, blade guard, dust cover, dust bag and a wrench.

    £899.76
  7. LF1000 Flip Over Saw 1650 Watt 240 Volt
    LF1000 Flip Over Saw 1650 Watt 240 Volt

    The Makita LF1000 Flip Over Saw is fitted with a lightweight and powerful motor that makes the conversion from mitre to table saw quick and easy whilst being able to cut tricky material and hard wood. The saw has a Soft-Start feature and maintains constant speed under load. For added safety is has a on-off switch with anti restart feature.

    It has a machined aluminium table for strength and accuracy, whilst the aluminium cast base gives superb rigidity. The fold away legs allow for easy transport in car or van. It is excellent for all aspects of site work, including 1st and 2nd fix.

    It is supplied with a TCT blade, rip fence, bevel guide, push stick, blade guard, dust cover, dust bag and a wrench.

    £899.76
  8. HM1304 29mm Hex Demolition Hammer 1500 Watt 110 Volt
    HM1304 29mm Hex Demolition Hammer 1500 Watt 110 Volt

    The Makita HM1304 29mm Hex Demolition Hammer produces an extremely low noise and vibration with outstanding power. The lock-on button allows for continuous operation and it fitted with an ergonomic soft rubber grip. The tool is double insulated for added safety.

    It is supplied with a bull point and a carry case.

    £855.60
  9. HR4511C SDS Max AVT Rotary Demolition Hammer 1350 Watt 110 Volt
    HR4511C SDS Max AVT Rotary Demolition Hammer 1350 Watt 110 Volt

    The Makita HR4511C SDS Max AVT Rotary Demolition Hammer has 2 modes of operation: Rotary Hammer and Hammer Only. It is fitted with a anti-vibration system for ultra-low vibration. It is fitted with a padded, spring loaded, hinged rubberised grip and comes with 2 side handles for increased control.

    It has a torque limiter so when drill hits reinforcement the torque limiter stops power and a recessed change lever that is mounted on top of machine to reduce breakage even if machine is dropped or laid down carelessly. The drill is double insulated for increased safety.

    Supplied with: 1 x Bit Grease, 1 x Depth Stop, 2 x Side Handles and 1 x Carry Case.

    £785.22
  10. HR4511C SDS Max AVT Rotary Demolition Hammer 1350 Watt 240 Volt
    HR4511C SDS Max AVT Rotary Demolition Hammer 1350 Watt 240 Volt

    The Makita HR4511C SDS Max AVT Rotary Demolition Hammer has 2 modes of operation: Rotary Hammer and Hammer Only. It is fitted with a anti-vibration system for ultra-low vibration. It is fitted with a padded, spring loaded, hinged rubberised grip and comes with 2 side handles for increased control.

    It has a torque limiter so when drill hits reinforcement the torque limiter stops power and a recessed change lever that is mounted on top of machine to reduce breakage even if machine is dropped or laid down carelessly. The drill is double insulated for increased safety.

    Supplied with: 1 x Bit Grease, 1 x Depth Stop, 2 x Side Handles and 1 x Carry Case.

    £785.22
  11. HR4013C 40mm AVT SDS MAX Rotary Hammer 1000 Watt 110 Volt
    HR4013C 40mm AVT SDS MAX Rotary Hammer 1000 Watt 110 Volt

    The Makita HR4013C 40mm AVT SDS MAX Rotary Hammer has been developed to provide higher operating efficiency and more comfort with an unrivalled low level of vibration. It has a one touch sliding chuck for easy bit installation and removal and a easy to operate operation-mode change lever. This is located on the top of the motor housing for reduced possibility of breakage.

    The soft no load function automatically reduces the motor speed during idling to suppress the vibration of the machine body. There is a handy LED service light that indicates when to replace carbon brush, preventing additional damage to the gearing's.

    The vibration absorbing housing offers unrivalled low level of vibration. In hammering mode, the on/off switch is switchable between two switches to meet your application, for Continuous or Intermittent chiseling applications.

    £779.70
  12. HR4013C 40mm AVT SDS MAX Rotary Hammer 1000 Watt 240 Volt
    HR4013C 40mm AVT SDS MAX Rotary Hammer 1000 Watt 240 Volt

    The Makita HR4013C 40mm AVT SDS MAX Rotary Hammer has been developed to provide higher operating efficiency and more comfort with an unrivalled low level of vibration. It has a one touch sliding chuck for easy bit installation and removal and a easy to operate operation-mode change lever. This is located on the top of the motor housing for reduced possibility of breakage.

    The soft no load function automatically reduces the motor speed during idling to suppress the vibration of the machine body. There is a handy LED service light that indicates when to replace carbon brush, preventing additional damage to the gearing's.

    The vibration absorbing housing offers unrivalled low level of vibration. In hammering mode, the on/off switch is switchable between two switches to meet your application, for Continuous or Intermittent chiseling applications.

    £779.70
  13. HR3541FC SDS Max AVT Rotary Hammer 850 Watt 240 Volt
    HR3541FC SDS Max AVT Rotary Hammer 850 Watt 240 Volt

    The Makita HR3541C Rotary Hammer is fitted with Anti-Vibration Technology for increased user protection. Fitted with a soft start and is able to maintain constant speed under load, this machine is truly verstile.

    The torque limiter stops the drill when the bit hits against reinforcements and it has a built in job light. It has three modes of operation: rotary only, hammer only and rotary hammer.

    Supplied with a side handle, depth gauge, bit grease and a carry case.

    £720.36
  14. HM1111C SDS Max AVT Demolition Hammer 1300 Watt 240 Volt
    HM1111C SDS Max AVT Demolition Hammer 1300 Watt 240 Volt

    The Makita HM1111C SDS Max AVT Demolition Hammer has a high performance motor and is extremely durable with an easy-to-hold barrel design. Anti-vibration technology ensures extra-low vibration performance. The D-shaped handle swivels 360 degrees to your desired position.

    It is supplied with a bull point, bit grease, side handle and a carry case.

    £669.30
  15. HM1111C SDS Max AVT Demolition Hammer 1300 Watt 110 Volt
    HM1111C SDS Max AVT Demolition Hammer 1300 Watt 110 Volt

    The Makita HM1111C SDS Max AVT Demolition Hammer has a high performance motor and is extremely durable with an easy-to-hold barrel design. Anti-vibration technology ensures extra-low vibration performance. The D-shaped handle swivels 360 degrees to your desired position.

    It is supplied with a bull point, bit grease, side handle and a carry case.

    £669.30
  16. GN900SE First Fix Gas Nailer 7.2 Volt
    GN900SE First Fix Gas Nailer 7.2 Volt

    The Makita GN900SE First Fix Gas Nailer is a cordless clipped head nailer developed for a wide range of framing applications. It uses fuel gas as the power source to provide freedom from hoses and compressors and is fitted with a LED indication lamp, with battery power warning and trouble detection functions, for convenience of operation and repair. The nailer is depth adjustable for a wide range of applications.

    Comes with a handy cleaning kit and Bag.

    £655.78
  17. 2012NB Planer / Thicknesser 1650 Watt 110 Volt
    2012NB Planer / Thicknesser 1650 Watt 110 Volt

    The Makita 2012NB Planer/Thicknesser has an easy adjustment for an accurate & even finish with a fine depth adjustment. It has a large material capacity and the downward pressure system stops sniping of the timber when feeding in materials. It is double insulated for increased protection.

    It is supplied with a wrench, magnetic holder and a dust extraction hood.

    £619.62
  18. EK6100 305mm Disc Cutter Petrol 2-Stroke Engine
    EK6100 305mm Disc Cutter Petrol 2-Stroke Engine

    The Makita EK6100 305mm (12in) Petrol Disc Power Cutter comes with a 61cm³ 2-stroke engine. This lightweight cutter comes with a high quality driving belt that does not require re-tensioning once the proper tension is adjusted. It also features an enhanced air filtration system with cyclone pre-separation technology to efficiently remove dust particles from the air, and subsequently reduce the amount of dust stuck on the filter increasing the life of the product.

    For your convenience this cutter also comes equipped with a spring-assisted recoil starter and fuel primer to drastically reduce the pull force required to start the machine for an EasyStart everytime. For your safety the cutter is also fitted with a simple touch and stop switch.

    This Cutter also features the Makita patented leak proof fuel tank ventilation to avoid fuel leakage even when the product is tilted. Also for Adequate dust protection the water supply is fitted with an intake filter and adjustment. This product was developed with a stratified scavenging system to ensure it complies with all known exhaust emission regulations.

    The EK6100 is supplied with a tool kit and a dust suppression kit. Wheel not Included.

    £619.62
  19. 2012NB Planer / Thicknesser 1650 Watt 240 Volt
    2012NB Planer / Thicknesser 1650 Watt 240 Volt

    The Makita 2012NB Planer/Thicknesser has an easy adjustment for an accurate & even finish with a fine depth adjustment. It has a large material capacity and the downward pressure system stops sniping of the timber when feeding in materials. It is double insulated for increased protection.

    It is supplied with a wrench, magnetic holder and a dust extraction hood.

    £619.62
  20. HR4001C SDS Max 40mm Rotary Demolition Hammer 1100 Watt 110 Volt
    HR4001C SDS Max 40mm Rotary Demolition Hammer 1100 Watt 110 Volt

    The Makita HR4001C SDS Max 40mm Rotary Demolition Hammer has been developed to surpass competitions in vibration level, operation efficiency and cost-effectiveness. Features selectable two on-off switches, soft start and electronic speed control for increased user ease.

    The torque limiter stops when the bit hits against reinforcements. It has two functions, rotary hammer and hammer only. The tool is double insulated for increased user safety.

    It is supplied with bit grease, depth stop, 2 handles and a carry case.

    £609.96
  21. HR4001C SDS Max 40mm Rotary Demolition Hammer 1100 Watt 240 Volt
    HR4001C SDS Max 40mm Rotary Demolition Hammer 1100 Watt 240 Volt

    The Makita HR4001C SDS Max 40mm Rotary Demolition Hammer has been developed to surpass competitions in vibration level, operation efficiency and cost-effectiveness. Features selectable two on-off switches, soft start and electronic speed control for increased user ease.

    The torque limiter stops when the bit hits against reinforcements. It has two functions, rotary hammer and hammer only. The tool is double insulated for increased user safety.

    It is supplied with bit grease, depth stop, 2 handles and a carry case.

    £609.64
  22. 8406C Percussion Diamond Drill 1400 Watt 240 Volt
    8406C Percussion Diamond Drill 1400 Watt 240 Volt

    The Makita 8406C Percussion Diamond Drill has a percussion action for drilling pilot holes and rotary action for dry diamond core drilling. It is fitted with a torque limiter to prevent operator injury if the core bit snags and a vibration dampened rear handle. Other features include a soft start, constant speed under load, and double insulation. The tool is e excellent for plumbers, electricians and general contractors.

    Supplied with a drill chuck, chuck key, side handle, depth stop and a carry case.

    £587.88
  23. 8406C Percussion Diamond Drill 1400 Watt 110 Volt
    8406C Percussion Diamond Drill 1400 Watt 110 Volt

    The Makita 8406C Percussion Diamond Drill has a percussion action for drilling pilot holes and rotary action for dry diamond core drilling. It is fitted with a torque limiter to prevent operator injury if the core bit snags and a vibration dampened rear handle. Other features include a soft start, constant speed under load, and double insulation. The tool is e excellent for plumbers, electricians and general contractors.

    Supplied with a drill chuck, chuck key, side handle, depth stop and a carry case.

    £587.88
  24. HR3210FCT SDS Plus Rotary Hammer Drill with QC Chuck 850 Watt 240 Volt
    HR3210FCT SDS Plus Rotary Hammer Drill with QC Chuck 850 Watt 240 Volt

    The Makita HR3210FCT SDS+ Rotary Hammer Drill with three drilling modes of operation: hammer drill, rotary drill and hammer only. Rotary drilling with hammer support can be selected as can pure hammer-only action for heavy-duty breaking and chiselling. It is fitted with a quick change chuck and an LED job light.

    It features the unique Makita AVT Anti Vibration Technology design employing the pneumatic pressure created in the drills hammer piston chamber to move a counter balance in the opposite direction to reduce the impact vibrations at the steel point. This dramatically reduces vibration.

    It is supplied with; a side handle, depth stop, bit grease and a carry case.

    £574.08
  25. DLS713Z Cordless Slide Compound Mitre Saw 18 Volt Bare Unit
    DLS713Z Cordless Slide Compound Mitre Saw 18 Volt Bare Unit

    The Makita DLS713Z Cordless Slide Compound Mitre Saw is extremely portable and compact with a four pole slide construction that promotes vibration free, precise cutting. It is also fitted with an electric brake for added safety and an ergonomic soft grip.

    Bare Unit, No Battery or Charger.

    £572.70
  26. GN900SE First Fix Gas Nailer 7.2 Volt 2 x 1.0Ah Li-Ion
    GN900SE First Fix Gas Nailer 7.2 Volt 2 x 1.0Ah Li-Ion

    The Makita GN900SE First Fix Gas Nailer is a cordless clipped head nailer developed for a wide range of framing applications. It uses fuel gas as the power source to provide freedom from hoses and compressors and is fitted with a LED indication lamp, with battery power warning and trouble detection functions, for convenience of operation and repair. The nailer is depth adjustable for a wide range of applications.

    £546.48
  27. HM1101C SDS Max AVT Demolition Hammer 1300 Watt 240 Volt
    HM1101C SDS Max AVT Demolition Hammer 1300 Watt 240 Volt

    The Makita HM1101C SDS Max AVT Demolition Hammer is fitted with a one-touch sliding chuck for easy bit changes. The soft start feature ensures a smooth start every time and it has constant speed under load.

    The tool has double insulation to increase user safety. It is perfect for chiselling work in concrete, brick, stone and asphalt as well as for driving and compacting with appropriate accessories.

    It is supplied with a bull point, bit grease, side handle and a carry case.

    £529.92
  28. HM1101C SDS Max AVT Demolition Hammer 1300 Watt 110 Volt
    HM1101C SDS Max AVT Demolition Hammer 1300 Watt 110 Volt

    The Makita HM1101C SDS Max AVT Demolition Hammer is fitted with a one-touch sliding chuck for easy bit changes. The soft start feature ensures a smooth start every time and it has constant speed under load.

    The tool has double insulation to increase user safety. It is perfect for chiselling work in concrete, brick, stone and asphalt as well as for driving and compacting with appropriate accessories.

    It is supplied with a bull point, bit grease, side handle and a carry case.

    £529.92
  29. DHR243RMJ SDS Plus 3 Mode Hammer Drill 18 Volt 2 x 4.0Ah Li-Ion
    DHR243RMJ SDS Plus 3 Mode Hammer Drill 18 Volt 2 x 4.0Ah Li-Ion

    The Makita DHR243RMJ SDS Plus 3 Mode Hammer Drill has an efficient brushless DC motor. Has a quick change drill chuck and a easy-to-grip handle ergonomically designed to give maximum power thrust and provide a sure and comfortable grip in any operation; overhead application, drilling with palm-up or palm-down grip.

    The tool body is separated into the upper and lower housings at the foot of handle portion where the houses are jointed with vibration absorbing cushion rubbers. Unique rubber joint construction suppresses the transmission of vibration to battery terminals, minimising battery failures such as terminal breakage or poor electrical contact. Has 3 modes of operation rotation and hammering, hammering only and rotation only.

    DHR243RMJ: 2 x 18 Volt 4.0Ah Li-Ion Batteries.
    DHR243Z: Bare Unit, No Battery or Charger Supplied.

    £527.16
  30. GF600SE 2nd Fix Gas Nailer 15-64mm 7.2 Volt 1 x 1.0Ah Li-ion
    GF600SE 2nd Fix Gas Nailer 15-64mm 7.2 Volt 1 x 1.0Ah Li-ion

    The Makita GF600SE 2nd Fix Gas Nailer 15-64mm is a gas driven cordless Brad nailer for 16Ga straight finish nails. This handy nailer is fitted with a slim nose to allow better visibility and maneuverability particularly in those tight spaces. For your convenience the nailer also comes with an LED job light to illuminate dark areas, and an ergonomically designed handle with rubberized soft grip to provide a comfortable grip therefore minimizing hand fatigue and pain.

    This product also features a handy LED indication lamp for battery power warning and trouble detection functions for your convenience in operation and repair. The depth adjustable dial allows easy movement of the nose without the use of a wrench. The nailer also comes with a conveniently positioned hook for easy storage on rafters etc. The nailer is also equipped with a quick release tool-less nose to clear nail jams, along with a soft nose tip to prevent marking of the workpiece to ensure the perfect finish every time.

    A Magazine window is fitted for easy confirmation on nail size in magazine and a misfire inhibitor plate for smaller length nails. The nailer requires a 7.2V Li-ion battery as power source for ignition spark, gas mixing, air intake/exhaust and supply of cooling air.

    Supplied with hex wrench, case and goggles.

    £509.22
  31. Makita DST112Z 10mm Cordless Stapler Bare Unit 18 Volt
    Makita DST112Z 10mm Cordless Stapler Bare Unit 18 Volt

    The Makita DST112 10mm Cordless Stapler is fitted with an ergonomically designed handle and rubberised soft grip providing more comfort and control, while minimising hand fatigue. With a compact, lightweight design with a plastic magazine case with a staple window to check remaining staples. Offers both sequential and bump firing with a trigger lock to prevent fatigue during long work periods.

    For increased safety it is fitted with an anti-dry-fire mechanism and an LED job light for illuminating dark work spaces.

    Bare Unit, No Battery or Charger Supplied.

    Special Price £289.99 Was £508.80
  32. Makita DHS710ZJ 185mm LXT Twin Circular Saw & Case 36 Volt Bare Unit
    Makita DHS710ZJ 185mm LXT Twin Circular Saw & Case 36 Volt Bare Unit

    The Makita DHS710ZJ 185mm LXT Twin Circular Saw has a compact and lightweight design with a rear dust exhaust port. 

    Special Price £238.80 Was £463.20
  33. HR3210C SDS Plus AVT Rotary Hammer Drill 850 Watt 240 Volt
    HR3210C SDS Plus AVT Rotary Hammer Drill 850 Watt 240 Volt

    The Makita HR3210C SDS+ AVT Rotary Hammer Drill 850 Watt with three drilling modes of operation: hammer drill, rotary drill and hammer only. Rotary drilling with hammer support can be selected as can pure hammer-only action for heavy-duty breaking and chiselling.

    It has a soft start operation to ensure a smooth and even start every time, and the torque limiter stops the drill when the bit hits against reinforcements. It also has a built in job light.

    It features the unique Makita AVT Anti Vibration Technology design employing the pneumatic pressure created in the drills hammer piston chamber to move a counter balance in the opposite direction to reduce the impact vibrations at the steel point. This dramatically reduces vibration.

    It is supplied with; a side handle, depth stop, bit grease and a carry case.

    £448.50
  34. LS1018L 260mm Sliding Compound Mitre Saw 1430 Watt 240 Volt
    LS1018L 260mm Sliding Compound Mitre Saw 1430 Watt 240 Volt

    The Makita LS1018L 260mm Sliding Compound Mitre Saw has double sliding rails with linear ball bearings on each rail ensures a perfectly smooth and accurate cut. It has been designed for craftsmen and professional joinery shops but tough enough for site use. The angled motor housing ensures clearance for the thicker work-pieces whilst the electronic power control maintains constant blade speed under load. It has a adjustable sub-fence and a trench cutting facility.

    Electronic brake.
    Laser line.
    Double insulated.
    Soft start.

    £441.60
  35. LS1018L 260mm Sliding Compound Mitre Saw 1430 Watt 110 Volt
    LS1018L 260mm Sliding Compound Mitre Saw 1430 Watt 110 Volt

    The Makita LS1018L 260mm Sliding Compound Mitre Saw has double sliding rails with linear ball bearings on each rail ensures a perfectly smooth and accurate cut. It has been designed for craftsmen and professional joinery shops but tough enough for site use. The angled motor housing ensures clearance for the thicker work-pieces whilst the electronic power control maintains constant blade speed under load. It has a adjustable sub-fence and a trench cutting facility.

    Electronic brake.
    Laser line.
    Double insulated.
    Soft start.

    £441.60
Set Descending Direction
per page